en ru

 

Уголь сортовой в мешках (10, 25, 50 кг) для отопления и хозяйственно-бытовых потребностей

brik

Coal briquettes

Our company offer coal briquettes and pellets from coal

brik

 

Briqueting of coal

Packed coal

The company “LuganTopService” carries out deliveries of high – quality coal of marks D,G,B-3

153s

Equipment for briquetting bulk materials without binders.

 

 

EQUIPMENT FOR BRIQUETTING OF COAL DUST, PEAT, SLUDGE AND OTHER MATERIALS WITHOUT BINDERS

Extruding Machine

pr3

Production rate
1000-10000 kg/h

Dryer Granulator

pr3

Production rate
500-1500 kg/h

Roller Machine

briquette_press

Production rate
3000-5000 kg/h

 

 

 

EQUIPMENT FOR BRIQUETTING OF SAWDUST, STRAW, HUSKS OF SUNFLOWER AND OTHER ORGANIC MATERIALS

Impact Mechanical Machine

press6

Production rate
300-400 kg/h

 

Pellet Machine

press6

Production rate
1000 kg/h

 

Press For Briquetting Pini&Kay

pr1

Production rate
200-600 kg/h

 

 

 

EQUIPMENT FOR DRYING

Conveyor Thermal Dryer

press6

Production rate 1000-5000 kg/h

Aerodynamic drying

pr3

Production rate 400-800 kg/h

 

 

 

EQUIPMENT FOR CRUSHING

Hammer Crusher

press6

Production rate
1500-2000 kg/h

Deck Hammer Crusher

pr1

Production rate 1000 kg/h

Wood Shredder

pr2-2

Production rate 2,5-4,8 m3


Rotary Crusher

pr1

Production rate
20000-25000 kg/h


Cleaver-Chopper

pr1

Production rate
800-1600 kg/h


Shredder

pr1

Production rate
800-1600 kg/h

 

 

 

ANY ADDITIONAL EQUIPMENT

Forced Mixer

press6

Conveyor With Tape

pr2-2

 



Briquetting — is pressing in a General form is as follows: when pressure occurs external seal material by the voids between the particles. Then sealed and deform themselves particles; between them there is the molecular adhesion. High pressure at the end of pressing causes the transition of the elastic deformation of particles in plastic, due to which the structure of the briquette is strengthened and saved to the specified form. The nature of strains strongly influence of physico-chemical properties of the original material.

We will waste Your best form!

Due briquetting machines of company Lugantopservice, a variety of materials, such as coal,dust, rubble,brown coal,peat, waste wood (sawdust, chips), husks of sunflower,paper, without binders, turn into a compact, high-capacity according to its value, briquettes of uniform quality, thus increasing the calorific value and improves efficiency by combustion. Additionally, during briquetting non-combustible wastes (grate dust, metal chips, calx, cinder, waste industry of non-metallic building materials, a number of chemical plants and others) by means of volume reduction,improved portability,conditions of storage and use of these raw materials.

Depending technological conditions of lines of briquetting,our company manufactures and installs additional drying, milling and crushing and transporting equipment.

 

Extruding machine EB series are specially designed by our company for briquetting of coal dust, peat, sludge, and other bulk materials without binders. Due to the high pressure in the cone cells compression, formation of a high quality briquettes from a variety of bulk materials.

 

Roller machine relates to equipment for briquetting of powder-like materials pressure and can be used in various industries production of construction materials: ceramic, glass, in the manufacture of insulation materials in the mining and other industries, and also for processing of wastes of various industries.

 

Impact mechanical machine (Nestro) is used as professional equipment for production of fuel briquettes from waste wood (sawdust, chips), peel of sunflower, rice, buckwheat, oat straw. Reliable design of the press (crank mechanism) provides a stable production of high quality products at low power consumption.

 

Press for briquetting Pini & Kay is intended for briquetting and as a raw material can be used - sawdust, shavings, husks of sunflower, buckwheat, straw, rice husk and other crushed vegetative waste products. Briquetting occurs due to the high pressure created by the screw, and temperature. The temperature is controlled by the device, and is set depending on the characteristics of the raw materials. Bonding small particles occurs due to the lignin contained in raw materials.

 

Pellet press — specially designed granulators for the sphere of bioenergetics. Press granulators are designed for the production of pellets from tainted granulated raw materials: sawdust and other wood waste, straw, husk of grain, sunflower husk, Barda, peat, chicken manure, TMV, etc.

 

Dryer Granulator  is intended to receive granules faction 8-16 mm of various bulk materials of organic and non-organic origin with simultaneous predrying of the final product to optimal moisture.

 

Conveyor dryers are one of the most critical link in the cycle of manufacture of briquettes. Conveyor dryers consists of moving in the drying chamber tape or roller chains with pendants bearing products. For the period of a revolution of the conveyor belt passes the drying cycle.

 

Aerodynamic drying — wind tunnel dryer rapid stream of hot air supports raw materials in limbo, where they are dried. As the air flow rate is very high, and the materials are directly into it, the heat exchange between the air and the material is very large. In the process of drying, the clean cold air through the heat generator is heated and mixed with wet materials. Wet sawdust are dried in a few seconds. Next dry materials are produced through the fan and the cyclone, the exhaust air is discharged to atmosphere.

 

Hammer crusher — mechanical crushing machine used to destroy pieces, grains and particles of the vegetable raw material and similar materials, by crushing blows of the hammer, hinged on the rapidly rotating rotor, and the method of destruction pieces with impacts on the plates of the hull of the crusher.

 

Hammer deck crusher  is suitable for crushing of wood chips, shavings, wood, pieces of bark, small lump of wood waste to the necessary sizes.

 

Rotary crushers are intended for the impact of the crushing of various materials. These crushers provide a high degree of fragmentation, which allows a large piece of material to get small.

 

Wood Shredder is designed for processing wood waste (tops of trees, sub-standard pieces, large boughs etc) into technological chips.

 

Shredder (Schroeder)is used for preliminary (initial) crushing of materials. Using shredders can grind various polymers, fabrics, rubber, paper, cardboard, solid domestic wastes, wastes of woodworking, furniture, appliances.

 

Cleaver-Chopper innovative equipment,which simultaneously combines the functions of the unit for splitting wood (wood, small stumps, large scraps of wood and wood-chipping and small-sized waste (tops, boards, slabs, tree branches into technological chips.

 

Forced mixer (mixer) — machine cycle action, has fixed a mixing bowl and rotor with blades. Drive of working body is a gear motor MU, NMRW through the reference node. Mixing blades have the ability to control the components of different factions, in case of wear easily replaced. Download mixer can be carried out both manually and with the help of screw conveyors, augers, skip loaders, weighers cement, water and aggregate (in the case of a mixer application in a production line). Materials included in the mix mixed activator, which provides the qualitative mixing of mix components. Activator drive from the gearbox, which is driven by an electric motor. The capacity of the mixer is installed on the frame. Mixing time is 90 seconds. The unloading is carried out with the help of the sector gate, located in the bottom of the bowl, a portable tank or on a belt conveyor.

 

Conveyor with tape — conveying device of continuous action with a working body in the form of a tape. Belt conveyor is used for moving in horizontal or halfhorizontal directions variety of bulk and General cargo, as well as for the interoperable transportation of products in the mass production. They are widely used in all industries and are the main aggregates of the motorization of transport in foundries (supply and distribution of land and waste management), the fuelpush power plants, above-ground and underground transportation of coal and breeds in coal, ore, coke and fluxes in metallurgy, building materials and mineral resources in quarries, grain in granaries, sand and stone for the construction of canals and hydro power stations.